PRODUCTS & SERVICES
 

 
   
HDT1000
 
Advanced Feature
Specifcation For DVB Terrestrial Receiver
  Fully comply with DVB and MPEG-2 standards, eceive Free To Air programs.
  SPDIF Digital Audio Output for an external Dolby Digital television or Digital Amplifier or DAC
  Software upgrades through RS-232 port and Receiver to Receiver
  Automatic network search for newly added channels/programs
  Full function IR remote control
  Signal strength display
  Channel management and control
 

Technial Specification
Tuner
IF Input UHF : 520MHz to 820MHz;VHF : 174MHz to 230MHz
Input impedance 75Ω
Signal Level -85dBm to-20dBm
Connector IEC169-2, Female, Loop Through
Channel Bandwidth UHF/7MHz, VHF/7MHz
Channel Assignment Australia Channel and ± 166.666KHz offset
Modulation Modes QPSK, 16QAM, 64QAM

Demodulation
Standard DVB-T
OFDM Spectrum 2k and 8k-carrier non-hierarchical and hierarchical
(DVBT-T and NorDig compliant)
Modulation Modes QPSK, 16QAM, 64QAM
Guard Interval Modes 1/32, 1/16, 1/8, 1/4 active symbol duration
FEC Modes Rate 1/2, 2/3, 3/4, 5/6, 7/8

Memory
SERIAL FLASH MEMORY 1MBit
NAND FLASH MEMORY 128MBit
DDR SDRM 64MByte

Video decoder
Standard CD ISO/IEC 13818-2, MPEG-2 MP@HL
Video aspect ratio 4:3, 16:9
Audio decoder
Standard ISO/IEC 11172-3
Audio decoder MPEG-1 Layer I and II
Audio channel Dual-channel, OLBY 5.1
Volume control 10 Levels adjustment

Connector
RF output (optional) 1-65 CH
Audio output 2 X RCA (Dual-channel);SPDIF(DOLBY 5.1)
Video output 1 X RCA (CVBS);3 X RCA (YpbPr);VGA (RGB);DVI ;1 X Min Din(S-video)



These are recommendations only. There are variables that may require alterations to these dimensions. Specifications subject to change without notice. Selections, offers and programs may vary by country; contact CHANGHONG overseas business department for complete details.


©2003-2005 changhong electric co., ltd. all rights reserved.
Global Sites